+92 (51) 236 1239 | +92 (348) 000 1239 | CONTACT US
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • HC-06 Bluetooth Module HC-06 Bluetooth Module
  • HC-06 Bluetooth Module HC-06 Bluetooth Module

HC-06 Bluetooth Module

Be the first to review this product

Quick Overview

HC-06 Wireless Bluetooth Serial Port Pass-through (SPP) module

Availability: In stock

Regular Price: PKR1,150.00

Special Price PKR750.00

Details

HC-06 wireless Bluetooth serial pass through transceiver module can be used for replacing RS232 cable between a microcontroller and PC. The module also can be used for connecting the Cell Phones with Bluetooth Peripheral to Embedded Boards or Machines using standard Bluetooth SPP Profile.

Usage:

  • Default serial port setting : 9600, N, 8, 1
  • Pairing code : 1234
  • Running in slave role: Pair with BT dongle and master module

Applications:

  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it
  • simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
  • Computer and peripheral devices
  • GPS receiver
  • Industrial control
  • MCU projects

Technical Specifications:

Pinout

  • KEY: according to the data sheet, pull-up this pin while power-on-reset of the module to enforce AT mode.
  • VCC is indicated in the range of 3.6V-6V.
  • GND: Ground
  • TXD: serial output of the module, to be connected to RX of the microcontroller. Note that this signal is using 3.3V logic level
  • RXD: serial input of the module, to be connected to the TX of the microcontroller. Note that this signal is using 3.3V logic levels.
  • STATE: connected to LED2 (Pin32) of the module,

AT Command Supported by HC06

COMMANDRESPONSECOMMENT
AT OK Used to verify communication
AT+VERSION OKlinvorV1.8 The firmware version (version might depend on firmware)
AT+NAMExyz OKsetname Sets the module name to “xyz”
AT+PIN1234 OKsetPIN Sets the module PIN to 1234
AT+BAUD1 OK1200 Sets the baud rate to 1200
AT+BAUD2 OK2400 Sets the baud rate to 2400
AT+BAUD3 OK4800 Sets the baud rate to 4800
AT+BAUD4 OK9600 Sets the baud rate to 9600
AT+BAUD5 OK19200 Sets the baud rate to 19200
AT+BAUD6 OK38400 Sets the baud rate to 38400
AT+BAUD7 OK57600 Sets the baud rate to 57600
AT+BAUD8 OK115200 Sets the baud rate to 115200
AT+BAUD9 OK230400 Sets the baud rate to 230400
AT+BAUDA OK460800 Sets the baud rate to 460800
AT+BAUDB OK921600 Sets the baud rate to 921600
AT+BAUDC OK1382400 Sets the baud rate to 1382400

Documents Pacakge:

  • Using the HC-06 Bluetooth Module – See Here
  • AT command mode of HC-05 and HC-06 Bluetooth module – See Here
  • Add bluetooth to your Arduino project – Arduino+HC-06 – See Here
  • HC-06 module datasheet (without base pcb)

Supported Android Apps:

The HC-06 although supports several android applications but following is a list of applications that were tested to work with this module:

  1. microController BT: https://play.google.com/store/apps/details?id=com.kvndev.android.three
  2. Arduino Bluetooth Controller: https://play.google.com/store/apps/details?id=eu.jahnestacado.arduinorc (Connects without problem needs to be tested more)

[!] Note: If you are having connection issues you may need to power off and power on your HC-06 Bluetooth Module.

Package Includes:

  • 1 x HC-06 Bluetooth Module 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

This is custom tab. You can add custom tab as an attribute for entire products, or for each categories. You can add CMS content such as sizing guide or videos to enhance product detail.

Also Purchased